IGEPv2 build broken?

February 2nd, 2014

Home Forums Troubleshooting IGEPv2 build broken?

This topic contains 1 reply, has 2 voices, and was last updated by  plhardy 7 months, 3 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • February 2, 2014 at 10:11 #383

    stefan
    Subscriber

    Hi,

    I tried to reactivate my IGEPv2 board but failed.

    I changed the meta file from

    MACHINE_XLOADER_CONFIG=”igep0020_config”

    to

    MACHINE_XLOADER_CONFIG=”igep00x0_config”

    to help x-loader to compile, but when I try on target, it stops at mounting the rootfs (Waiting for root device /dev/mmcblk0p2…)

    Any ideas?

    February 10, 2014 at 20:54 #384

    plhardy
    Subscriber

    Well sorry to not be helpfull, i have a problem with my IGEPv2 too, it does not even compile completly, so you get a better result that i do.

    Can you detail what you did ? I can try on my side.

    How long does it take to compile ? It took me more than 4 hour to finaly miserably fail.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.