No output through HDMI -xorg-server issue

[greg090Subscriber]

Hi,

I have just compiled the default image for omap3 igepv2. When it is booting up it fails to output to HDMI, I have done some investigation and it seems to me that the video driver and xorg is not working and therefore xbmc is not loading.
When i try and run xmbc from /usr/bin/xmbc i get

“Error: unable to open display :0.0
XBMC needs hardware accelerated OpenGL rendering.
Install an appropriate graphics driver.

Please consult XBMC Wiki for supported hardware
http://wiki.xbmc.org/?title=Supported_hardware ”

Here is the boot log from serial

Uncompressing Linux… done, booting the kernel.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-rc6 (root@greg) (gcc version 4.6.4 20121001 (prerelease) (Linaro GCC 4.6-2012.10) ) #1 Sat Nov 24 14:04:54 UTC 2012
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: IGEP v2 board
[ 0.000000] Reserving 12582912 bytes SDRAM for VRAM
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] OMAP3630 ES1.1 (l2cache iva sgx neon isp 192mhz_clk )
[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/200/800 MHz
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 109196
[ 0.000000] Kernel command line: console=ttyO2,115200n8 root=/dev/mmcblk0p2 rootwait omapfb.mode=dvi:1280x720MR-32@60 omapfb.vram=0:8M,1:4M mem=442M
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 430MB = 430MB total
[ 0.000000] Memory: 430984k/430984k available, 21624k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 – 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 – 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdc000000 – 0xf8000000 ( 448 MB)
[ 0.000000] lowmem : 0xc0000000 – 0xdba00000 ( 442 MB)
[ 0.000000] modules : 0xbf000000 – 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 – 0xc04b3000 (4780 kB)
[ 0.000000] .init : 0xc04b3000 – 0xc04df000 ( 176 kB)
[ 0.000000] .data : 0xc04e0000 – 0xc051d300 ( 245 kB)
[ 0.000000] .bss : 0xc051d324 – 0xc0538968 ( 110 kB)
[ 0.000000] NR_IRQS:410
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[ 0.000000] Total of 96 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[ 0.000000] Console: colour dummy device 80×30
[ 0.000152] Calibrating delay loop… 798.24 BogoMIPS (lpj=3117056)
[ 0.039123] pid_max: default: 32768 minimum: 301
[ 0.039276] Mount-cache hash table entries: 512
[ 0.039550] Initializing cgroup subsys cpuacct
[ 0.09581] Initializing cgroup subsys devices
[ 0.039611] Initializing cgroup subsys freezer
[ 0.039611] Initializing cgroup subsys blkio
[ 0.039642] CPU: Testing write buffer coherency: ok
[ 0.040344] devtmpfs: initialized
[ 0.044189] print_constraints: dummy:
[ 0.044464] NET: Registered protocol family 16
[ 0.044769] GPMC revision 5.0
[ 0.046966] OMAP GPIO hardware version 2.5
[ 0.048980] omap_mux_init: Add partition: #1: core, flags: 0
[ 0.049041] IGEP2: Hardware Revision C (B-NON compatible)
[ 0.051269] Reprogramming SDRC clock to 200000000 Hz
[ 0.051269] dpll3_m2_clk rate change failed: -22
[ 0.059387] omap-mcbsp.2: alias fck already exists
[ 0.059631] omap-mcbsp.3: alias fck already exists
[ 0.060821] OMAP DMA hardware revision 5.0
[ 0.075347] bio: create slab at 0
[ 0.076354] print_constraints: vwlan: 3300 mV normal
[ 0.077667] SCSI subsystem initialized
[ 0.079742] usbcore: registered new interface driver usbfs
[ 0.080078] usbcore: registered new interface driver hub
[ 0.080261] usbcore: registered new device driver usb
[ 0.080871] omap_i2c omap_i2c.3: bus 3 rev1.4.0 at 100 kHz
[ 0.081420] omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2600 kHz
[ 0.084014] twl4030: PIH (irq 7) chaining IRQs 368..375
[ 0.084045] twl4030: power (irq 373) chaining IRQs 376..383
[ 0.084503] twl4030: gpio (irq 368) chaining IRQs 384..401
[ 0.086242] print_constraints: VUSB1V5: 1500 mV normal standby
[ 0.086791] print_constraints: VUSB1V8: 1800 mV normal standby
[ 0.087310] print_constraints: VUSB3V1: 3100 mV normal standby
[ 0.088806] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[ 0.090881] print_constraints: VIO: 1800 mV normal standby
[ 0.091461] print_constraints: VMMC1: 1850 3150 mV at 3000 mV normal standby
[ 0.092071] print_constraints: VDVI: 1800 mV normal standby
[ 0.093139] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.093872] Switching to clocksource 32k_counter
[ 0.094024] FS-Cache: Loaded
[ 0.094390] CacheFiles: Loaded
[ 0.112243] NET: Registered protocol family 2
[ 0.112396] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.112670] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.112945] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.113098] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.113128] TCP reno registered
[ 0.113128] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.113159] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.113342] NET: Registered protocol family 1
[ 0.113586] RPC: Registered named UNIX socket transport module.
[ 0.113586] RPC: Registered udp transport module.
[ 0.113616] RPC: Registered tcp transport module.
[ 0.113616] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.126831] JFFS2 version 2.2. (NAND) (SUMMARY) �© 2001-2006 Red Hat, Inc.
[ 0.127532] msgmni has been set to 841
[ 0.128295] io scheduler noop registered
[ 0.128326] io scheduler deadline registered
[ 0.128387] io scheduler cfq registered (default)
[ 0.130065] i2c-core: driver [adp8860_bl] using legacy suspend method
[ 0.130065] i2c-core: driver [adp8860_bl] using legacy resume method
[ 0.130615] OMAP DSS rev 2.0
[ 0.164123] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.165740] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
[ 0.166107] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
[ 0.166381] omap_uart.2: ttyO2 at MMIO 0×49020000 (irq = 74) is a OMAP UART2
[ 0.738250] console [ttyO2] enabled
[ 0.742248] omap_uart.3: ttyO3 at MMIO 0×49042000 (irq = 80) is a OMAP UART3
[ 0.750427] [drm] Initialized drm 1.1.0 20060810
[ 0.764434] brd: module loaded
[ 0.772583] loop: module loaded
[ 0.777923] omap2-nand driver initializing
[ 0.782531] OneNAND driver initializing
[ 0.786621] omap2-onenand omap2-onenand: initializing on CS0, phys base 0×20000000, virtual base dc0c0000, freq 0 MHz
[ 0.797760] Muxed OneNAND(DDP) 512MB 1.8V 16-bit (0×58)
[ 0.803222] OneNAND version = 0×0031
[ 0.809234] Scanning device for bad blocks
[ 0.839904] OneNAND eraseblock 610 is an initial bad block
[ 0.845672] OneNAND eraseblock 611 is an initial bad block
[ 0.904937] OneNAND eraseblock 1852 is an initial bad block
[ 0.910827] OneNAND eraseblock 1853 is an initial bad block
[ 1.012847] Creating 5 MTD partitions on “omap2-onenand”:
[ 1.018524] 0×000000000000-0×000000080000 : “X-Loader”
[ 1.025329] 0×000000080000-0×000000200000 : “U-Boot”
[ 1.031829] 0×000000200000-0×000000280000 : “Environment”
[ 1.038757] 0×000000280000-0×000000580000 : “Kernel”
[ 1.045257] 0×000000580000-0×000020000000 : “File System”
[ 1.053253] smsc911x: Driver version 2008-10-21
[ 1.059387] smsc911x-mdio: probed
[ 1.062957] smsc911x smsc911x.0: eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, irq=-1)
[ 1.073120] smsc911x smsc911x.0: eth0: MAC Address: 1a:58:a8:59:57:1d
[ 1.080535] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 2.094024] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 2.100402] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[ 2.108276] ehci-omap ehci-omap.0: irq 77, io mem 0×48064800
[ 2.125305] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 2.131469] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.138580] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.146148] usb usb1: Product: OMAP-EHCI Host Controller
[ 2.151702] usb usb1: Manufacturer: Linux 3.2.0-rc6 ehci_hcd
[ 2.157653] usb usb1: SerialNumber: ehci-omap.0
[ 2.163146] hub 1-0:1.0: USB hub found
[ 2.167114] hub 1-0:1.0: 3 ports detected
[ 2.197418] input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input0
[ 2.208984] i2c /dev entries driver
[ 2.213928] OMAP Watchdog Timer Rev 0×31: initial timeout 60 sec
[ 2.442718] ALSA device list:
[ 2.445861] No soundcards found.
[ 2.449615] TCP cubic registered
[ 2.452972] NET: Registered protocol family 17
[ 2.457702] NET: Registered protocol family 15
[ 2.462371] Registering the dns_resolver key type
[ 2.467346] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 2.475372] ThumbEE CPU extension supported.
[ 2.481536] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva
[ 2.489135] omap2_set_init_voltage: unable to set vdd_mpu_iva
[ 2.496185] clock: disabling unused clocks to save power
[ 2.502105] usb 1-1: new high-speed USB device number 2 using ehci-omap
[ 2.510162] omapfb omapfb: no driver for display: dvi
[ 2.515441] omapfb omapfb: no displays
[ 2.519409] omapfb omapfb: failed to setup omapfb
[ 2.524353] omapfb: probe of omapfb failed with error -22
[ 2.530731] regulator_init_complete: VDVI: incomplete constraints, leaving on
[ 2.539733] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 2.546722] Waiting for root device /dev/mmcblk0p2…
[ 2.666442] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 2.673461] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.680938] usb 1-1: Product: USB2.0 Hub
[ 2.686340] hub 1-1:1.0: USB hub found
[ 2.690643] hub 1-1:1.0: 4 ports detected
[ 2.696685] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 2.706909] mmc0: new high speed SD card at address 0001
[ 2.712982] mmcblk0: mmc0:0001 00000 1.89 GiB
[ 2.719085] mmcblk0: p1 p2
[ 2.772094] EXT2-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended
[ 2.796569] VFS: Mounted root (ext2 filesystem) on device 179:2.
[ 2.803131] Freeing init memory: 176K
[ 2.813995] mmc1: new SDIO card at address 0001
Failed to open /dev/kmsg for logging: No such file or �irectory 3.021667] systemd[1]: systemd 188 running in system mode. (-PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT -LIBCRYPTSETUP; o)

Welcome to GeeXboX devel-20121124-r15567!

[ 3.073303] systemd[1]: could not find module by name=’ipv6′
[ 3.079437] systemd[1]: Failed to insert ‘ipv6′
[ 3.085510] systemd[1]: Set hostname to .
[ 3.229248] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs an.
Expecting device dev-ttyO2.device…
[ OK ] Reached target Remote File Systems.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on Delayed Shutdown Socket.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Listening on udev Control Socket.
[ OK ] Reached target Swap.
[ OK ] Listening on Journal Socket.
Mounting POSIX Message Queue File System…
Mounting Debug File System…
Starting udev Coldplug all Devices…
Starting udev Kernel Device Manager…
Starting Journal Service…
[ OK ] Started Journal Service.
Starting Remount Root and Kernel File Systems…
[ OK ] Mounted POSIX Message Queue File System.
[ 3.522979] systemd-udevd[612]: starting version 188
[ OK ] Started udev Kernel Device Manager.
[ 3.537109] systemd-journald[613]: Fixed max_use=21.0M max_size=2.6M min_size=64.0K keep_free=10.5M
[ OK ] Mounted Debug File System.
[ 3.552917] systemd-journald[613]: Reserving 4792 entries in hash table.
[ OK ] Started Remount Root and Kernel File Systems.
[ 3.577331] systemd-journald[613]: Vacuuming…
[ OK ] Reached target Local File Systems (Pre).
Mounting Temporary Directory…
Starting Load Random Seed…
[ OK ] Mounted Temporary Directory.
[ OK ] Reached target Local File Systems.
Starting Recreate Volatile Files and Directories…
Starting Trigger Flushing of Journal to Persistent Storage…
[ OK ] Started Load Random Seed.
[ OK ] Started Recreate Volatile Files and Directories.
[ OK ] Reached target System Initialization.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ 3.823791] systemd-journald[613]: Received SIGUSR1
[ OK ] Started Trigger Flushing of Journal to Persistent Storage.
[ OK ] Listening on telnetd.socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting Command Scheduler…
[ OK ] Started Command Scheduler.
Starting ALSA mixer configuration…
Starting Avahi mDNS/DNS-SD Stack…
Starting Network backend…
Starting Getty on tty2…
[ OK ] Started Getty on tty2.
Starting Getty on tty3…
[ OK ] Started Getty on tty3.
Starting Getty on tty1…
[ OK ] Started Getty on tty1.
Starting udev automounter daemon…
[ OK ] Started udev automounter daemon.
Starting FTP Server…
[ OK ] Started FTP Server.
Starting Wi-Fi Security Service…
Starting Cache PCI devices…
Starting D-Bus System Message Bus…
[ OK ] Started D-Bus System Message Bus.
[ OK ] Started Network backend.
Starting Connection service…
[ OK ] Started Cache PCI devices.
Starting Video card detection…
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Started Wi-Fi Security Service.
[ 4.557128] cfg80211: Calling CRDA to update world regulatory domain
[ 4.638397] libertas_sdio: Libertas SDIO driver
[ 4.643188] libertas_sdio: Copyright Pierre Ossman
[ OK ] Started Video card detection.
Starting PowerVR SGX530 driver…
[ 4.758575] Disabling lock debugging due to kernel taint
[ 4.950775] libertas_sdio: probe of mmc1:0001:1 failed with error -16
[ 5.052490] Unable to handle kernel paging request at virtual address dc1b7f08
[ 5.060119] pgd = d9e1c000
[ 5.062957] [dc1b7f08] *pgd=9a819811, *pte=00000000, *ppte=00000000
[ 5.069519] Internal error: Oops: 807 [#1]
[ 5.073791] Modules linked in: snd_soc_twl4030 pvrsrvkm(O) snd_soc_core evdev regmap_i2c snd_pcm libertas_sdio(+) snd_page_alloc libertas snd_timer regmap_spi cfg80211 firmware_class lo
[ 5.091766] CPU: 0 Tainted: G O (3.2.0-rc6 #1)
[ 5.097717] PC is at OSWriteHWReg+0×10/0×18 [pvrsrvkm]
[ 5.103118] LR is at SGXInitialise+0xa4/0x1a0 [pvrsrvkm]
[ 5.108673] pc : [] lr : [] psr: 80000013
[ 5.108673] sp : d9c07c90 ip : d9c07ca0 fp : d9c07c9c
[ 5.120666] r10: 00000001 r9 : 00000000 r8 : ffffffff
[ 5.126129] r7 : 00000000 r6 : dc168120 r5 : dab14000 r4 : 00000000
[ 5.132965] r3 : 00003517 r2 : 80000000 r1 : 0000ff08 r0 : dc1a8000
[ 5.139770] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
[ 5.147247] Control: 10c5387d Table: 99e1c019 DAC: 00000015
[ 5.153259] Process pvrsrvinit (pid: 1115, stack limit = 0xd9c062f0)
[ 5.159881] Stack: (0xd9c07c90 to 0xd9c08000)
[ 5.164459] 7c80: d9c07cc4 d9c07ca0 bf099790 bf085de4
[ 5.173004] 7ca0: 00000001 000003e8 dab14000 00000000 00000000 00000000 d9c07d04 d9c07cc8
[ 5.181549] 7cc0: bf09a658 bf0996f8 00000000 bf0a0958 d9c07cf4 d9c07ce0 bf096df8 c0022b3c
[ 5.190093] 7ce0: d9eaaec0 00000000 d9c07d04 d9c07cf8 d9eaaec0 00000000 d9c07d24 d9c07d08
[ 5.198669] 7d00: bf092c74 bf09a610 d9eaaec0 d9c07d50 bf092c00 00000000 d9c07d48 d9c07d28
[ 5.207214] 7d20: bf097520 bf092c0c 00000001 d9c07d50 00000000 00000000 bf0a0950 d9c07d8c
[ 5.215759] 7d40: d9c07d58 bf092efc bf0974f4 bf092c00 00000000 00000000 00000000 d9eaadc0
[ 5.224334] 7d60: 00000014 ffffffff d9cfbbc0 dab14000 00000005 d9c07dc8 d9c06000 00000000
[ 5.232879] 7d80: d9c07dbc d9c07d90 bf09ad08 bf092e90 d9c07dc4 d9c07da0 dc168160 d9e60800
[ 5.241424] 7da0: d9cfbbc0 d9e60800 dab27000 00000000 d9c07e14 d9c07dc0 bf098ea8 bf09acdc
[ 5.250000] 7dc0: 00000000 00000000 bf092c00 00000000 d9c07e00 0f003160 d9c07df4 d9c07de8
[ 5.258544] 7de0: bf096cb0 c0388c80 d9c07e0c dab14000 00000000 00000000 d9e60800 dab27000
[ 5.267089] 7e00: d9c06000 00000000 d9c07e34 d9c07e18 bf098fa0 bf098e38 bf08ee00 00000000
[ 5.275665] 7e20: 00000000 dab26000 d9c07e44 d9c07e38 bf08edf4 bf098f24 d9c07e54 d9c07e48
[ 5.284210] 7e40: bf08ee10 bf08ede4 d9c07e6c d9c07e58 bf0972d0 bf08ee0c bf0a09bc dab27000
[ 5.292755] 7e60: d9c07e84 d9c07e70 bf08edc8 bf0972b4 bf0a0688 dab26000 d9c07ea4 d9c07e88
[ 5.301330] 7e80: bf094f08 bf08ed8c d9e60b80 d9e60b80 d9c07ed0 00000042 d9c07ecc d9c07ea8
[ 5.309875] 7ea0: bf0961a4 bf094ec4 00000042 0000045b bede5bbc 00000003 00000003 c000db28
[ 5.318420] 7ec0: d9c07f04 d9c07ed0 bf087e50 bf0960d0 00000042 0000001c bede5bf0 00000008
[ 5.326965] 7ee0: bede5be8 00000008 00000001 d9e60b80 bede5bbc d9e4bbf0 d9c07f7c d9c07f08
[ 5.335540] 7f00: c00a4878 bf087d98 dab0fbd0 d9cf1ee8 c051f200 00000000 dab0fbd0 d9cf1ee8
[ 5.344085] 7f20: d9c07f44 d9c07f30 c008664c c00935ac d9d28e00 dab0fbd0 d9c07f84 d9c07f48
[ 5.352630] 7f40: c0087508 c00865f4 c051f200 d9d28e34 00000000 40cbe000 d9d2b0c0 bede5bbc
[ 5.361206] 7f60: c01c6742 00000003 c000db28 d9c06000 d9c07fa4 d9c07f80 c00a4928 c00a43f4
[ 5.369750] 7f80: c0087874 00000000 00011008 bede5c08 00000000 00000036 00000000 d9c07fa8
[ 5.378295] 7fa0: c000d980 c00a48f4 00011008 bede5c08 00000003 c01c6742 bede5bbc 00000001
[ 5.386871] 7fc0: 00011008 bede5c08 00000000 00000036 00000014 00000000 00000014 00000000
[ 5.395416] 7fe0: 401165d8 bede5bb4 400eeab0 4022170c 20000010 00000003 ffffffff ffffffff
[ 5.403961] Backtrace:
[ 5.406555] [] (OSWriteHWReg+0×0/0×18 [pvrsrvkm]) from [] (SGXInitialise+0xa4/0x1a0 [pvrsrvkm])
[ 5.417510] [] (SGXInitialise+0×0/0x1a0 [pvrsrvkm]) from [] (SGXPostPowerState+0×54/0xa8 [pvrsrvkm])
[ 5.428863] r7:00000000 r6:00000000 r5:00000000 r4:dab14000
[ 5.434844] [] (SGXPostPowerState+0×0/0xa8 [pvrsrvkm]) from [] (PVRSRVDevicePostPowerStateKM_AnyVaCb+0×74/0x8c [pvrsrvkm])
[ 5.448211] r5:00000000 r4:d9eaaec0
[ 5.451995] [] (PVRSRVDevicePostPowerStateKM_AnyVaCb+0×0/0x8c [pvrsrvkm]) from [] (List_PVRSRV_POWER_DEV_PVRSRV_ERROR_Any_va+0x3c/0×60 [pvrsrvkm])
[ 5.467529] r6:00000000 r5:bf092c00 r4:d9c07d50 r3:d9eaaec0
[ 5.473510] [] (List_PVRSRV_POWER_DEV_PVRSRV_ERROR_Any_va+0×0/0×60 [pvrsrvkm]) from [] (PVRSRVSetDevicePowerStateKM+0×78/0xb8 [pvrsrvkm])
[ 5.488220] r3:00000000 r2:00000000 r1:bf092c00
[ 5.493072] r6:bf0a0950 r5:00000000 r4:00000000
[ 5.497924] [] (PVRSRVSetDevicePowerStateKM+0×0/0xb8 [pvrsrvkm]) from [] (SGXScheduleCCBCommandKM+0×38/0xb4 [pvrsrvkm])
[ 5.511077] [] (SGXScheduleCCBCommandKM+0×0/0xb4 [pvrsrvkm]) from [] (SetSGXDispatchTableEntry+0×344/0x3b4 [pvrsrvkm])
[ 5.524108] [] (SetSGXDispatchTableEntry+0x2c8/0x3b4 [pvrsrvkm]) from [] (SGXDevInitCompatCheck+0×88/0x4a0 [pvrsrvkm])
[ 5.537139] [] (SGXDevInitCompatCheck+0×0/0x4a0 [pvrsrvkm]) from [] (PVRSRVDevInitCompatCheck+0x1c/0×28 [pvrsrvkm])
[ 5.549865] r7:dab26000 r6:00000000 r5:00000000 r4:bf08ee00
[ 5.555847] [] (PVRSRVDevInitCompatCheck+0×0/0×28 [pvrsrvkm]) from [] (PVRSRVFinaliseSystem_CompatCheck_AnyCb+0×10/0×14 [pvrsrvkm])
[ 5.570068] [] (PVRSRVFinaliseSystem_CompatCheck_AnyCb+0×0/0×14 [pvrsrvkm]) from [] (List_PVRSRV_DEVICE_NODE_PVRSRV_ERROR_Any+0×28/0×48 [pvrsrvkm])
[ 5.585723] [] (List_PVRSRV_DEVICE_NODE_PVRSRV_ERROR_Any+0×0/0×48 [pvrsrvkm]) from [] (PVRSRVFinaliseSystem+0×48/0×58 [pvrsrvkm])
[ 5.599731] r5:dab27000 r4:bf0a09bc
[ 5.603515] [] (PVRSRVFinaliseSystem+0×0/0×58 [pvrsrvkm]) from [] (PVRSRVInitSrvDisconnectBW+0×50/0x7c [pvrsrvkm])
[ 5.616149] r4:dab26000 r3:bf0a0688
[ 5.619934] [] (PVRSRVInitSrvDisconnectBW+0×0/0x7c [pvrsrvkm]) from [] (BridgedDispatchKM+0xe0/0x1d0 [pvrsrvkm])
[ 5.632385] r6:00000042 r5:d9c07ed0 r4:d9e60b80 r3:d9e60b80
[ 5.638366] [] (BridgedDispatchKM+0×0/0x1d0 [pvrsrvkm]) from [] (PVRSRV_BridgeDispatchKM+0xc4/0xf0 [pvrsrvkm])
[ 5.650634] r8:c000db28 r7:00000003 r6:00000003 r5:bede5bbc r4:0000045b
[ 5.657470] r3:00000042
[ 5.660247] [] (PVRSRV_BridgeDispatchKM+0×0/0xf0 [pvrsrvkm]) from [] (do_vfs_ioctl+0×490/0×500)
[ 5.671142] r5:d9e4bbf0 r4:bede5bbc
[ 5.674896] [] (do_vfs_ioctl+0×0/0×500) from [] (sys_ioctl+0×40/0×64)
[ 5.683441] r9:d9c06000 r8:c000db28 r7:00000003 r6:c01c6742 r5:bede5bbc
[ 5.690277] r4:d9d2b0c0
[ 5.693023] [] (sys_ioctl+0×0/0×64) from [] (ret_fast_syscall+0×0/0×30)
[ 5.701751] r7:00000036 r6:00000000 r5:bede5c08 r4:00011008
[ 5.707702] Code: e1a0c00d e92dd800 e24cb004 f57ff04f (e7802001)
[ 5.714355] —[ end trace 6112fbda30a62ecf ]—
[ OK ] Started Connection service.
[ OK ] Reached target Network.
Starting Mount NFS resources…
Starting Mount Samba/CIFS resources…
[ OK ] Found device /dev/ttyO2.
Starting Serial Getty on ttyO2…
[ OK ] Started Serial Getty on ttyO2.
[ OK ] Reached target Login Prompts.
[ OK ] Started udev Coldplug all Devices.
[ OK ] Started Mount NFS resources.
[ OK ] Started Mount Samba/CIFS resources.
[ 6.617553] smsc911x smsc911x.0: eth0: SMSC911x/921x identified at 0xdc014000, IRQ: 336
[ OK ] Started ALSA mixer configuration.

[greg090Subscriber]

i missed off the last part

Welcome to GeeXboX arm devel-20121124-r15567 (C) 2002-2012
geexbox login:

Thanks for all your help so far.
Regards,
Greg

[Author]

Posts